Looking for a 4\" PVC 90 with screen for air intake

Pat_11

Looking for a 4" PVC 90 with screen for air intake? Any manufactures make one?

hr

Just find

some 1/4" stainless screen material. Cut it with a tin snips for a friction fit. This is what the factory send out with their fitings.

hot rod

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

John MacGregor

Air inlet

I don't know about Springfield, Hot Rod, but I do know we here in Northern Michigan gave up on SS hardware cloth after the first year the manufacturers provided them. They like to frost over from about 10* down. Makes for a lot of unhppy customers and service techs. Go to your plumbing wholesaler and get a Genova PVC 49230/40 "hub-fit" floor drain. We've had one here at the shop for 15 years with no problems. On a Glowcore, no less.

John MacGregor

Air inlet

I don't know about Springfield, Hot Rod, but I do know we here in Northern Michigan gave up on SS hardware cloth after the first year the manufacturers provided them. They like to frost over from about 10* down. Makes for a lot of unhppy customers and service techs. Go to your plumbing wholesaler and get a Genova PVC 49230/40 "hub-fit" floor drain. We've had one here at the shop for 15 years with no problems. On a Glowcore, no less.

bob young

fresh air inlet

how about a plain 'ole plumbing fresh air inlet plate . if you wanna go the xtra mile---go nickel bronze. won't succumb to hoarfrost either.