Click here to Find a Contractor in your area.
Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Anyone in the market for two decorative Gurney column radiators?
Mike Reavis_2
Member Posts: 307
in Controls
We will be retiring them soon from a working hydronic system that is undergoing renovation.
They are 39" High, 9.5" wide (3-column). I did not get the length, but one is eight section, and one is nine. Sorry, no picture, but I am sure that they are pictured in Dan's book "EDR". They are currently set up with one inch tappings. They are white, but have not been stripped, and refinished--they look good as is. They should be about 5 sq.ft of radiation for each section.
They are 39" High, 9.5" wide (3-column). I did not get the length, but one is eight section, and one is nine. Sorry, no picture, but I am sure that they are pictured in Dan's book "EDR". They are currently set up with one inch tappings. They are white, but have not been stripped, and refinished--they look good as is. They should be about 5 sq.ft of radiation for each section.
0
This discussion has been closed.
Categories
- 112.9K All Categories
- 81.2K THE MAIN WALL
- 2.5K A-C, Heat Pumps & Refrigeration
- 37 Biomass
- 394 Carbon Monoxide Awareness
- 2.7K Controls
- 1.4K Domestic Hot Water
- 3.8K Gas Heating
- 101 Geothermal
- 133 Indoor-Air Quality
- 2.4K Oil Heating
- 32 Pipe Deterioration
- 583 Plumbing
- 4.3K Radiant Heating
- 334 Solar
- 12.3K Strictly Steam
- 38 Water Quality
- 12 Industry Classes
- 51 Job Opportunities
- 8 Recall Announcements