Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

enerroyal hot air furnace

John Luebbers_2
John Luebbers_2 Member Posts: 17
in THE MAIN WALL
Has anyone ever seen an enerroyal warm air furnace? Went on a call and encountered one, trying to get any info I can on it.

Comments

  • Alan R. Mercurio_3
    Alan R. Mercurio_3 Member Posts: 1,624


    John, They are no longer around. What is it you needed to know? I have an old manual on that appliance including the comfort plus unit that could be attached to the furnace. May be I can help? I'm heading out right now 5 hr trip. but I'll bring the book with me and check in with you later.

    Have a great day.

    Your friend in the industry,
    Alan R. Mercurio

    www.oiltechtalk.com

    There was an error rendering this rich post.

  • John Luebbers_2
    John Luebbers_2 Member Posts: 17
    enerroyal

    Alan, thanks for your reply, I guess I was just curious, I went on an annual cleaning and found the unit to be interesting that's all. I would be curious to look at the book, but I guess it's not real necesarry. thanks for responding.


    John
  • John Luebbers_2
    John Luebbers_2 Member Posts: 17
    Aero burners

    Alan do you no where I can get any info on Aero burners for water heaters? And also miller oil burners for a mobile home furnace, came across one today, kind of looks like a wayne, but it says miller on it.


    John
  • clammy
    clammy Member Posts: 3,193
    miller

    I do believe the burner on the miller moblie home furnace are waynes just serviced on today also .I hate the trailer park then places make me feel fat in the hall way peace clammy

    R.A. Calmbacher L.L.C. HVAC
    NJ Master HVAC Lic.
    Mahwah, NJ
    Specializing in steam and hydronic heating

  • John Luebbers_2
    John Luebbers_2 Member Posts: 17


    Yea clammy turns out the miller gun is a wayne, pain in the crack to service, tight spot, webster pump with bleed screw on top of pump so your bleed tubing seems short, and this furnace is the moc model, door switch does not pull out, so you have to tape it in to service it, needed a third hand. Rough day yesterday.
  • Alan R. Mercurio_3
    Alan R. Mercurio_3 Member Posts: 1,624


    Hi John, sorry for the delay as you know I have been traveling and this weekend at home has been interesting to say the least I cannot leave our little town of Catawissa due to all bridges being flooded. arrggggg

    any how here are some links for you. Aero is now owned by Bradford White so that would be your source for that. If you need info on the wanye burners or other burners you can look in the "Just for Teks" section of my website www.oiltechtalk.com

    Or you can just contact me I have tons of data that I have been turing into electronic files. I'm always happy to share when ever I can!

    "The knowledge we share today will make a better industry tomorrow"

    Bradford White


    Miller Furnaces


    Your friend in the industry,
    Alan R. Mercurio

    www.oiltechtalk.com

    There was an error rendering this rich post.

This discussion has been closed.

Categories