Tear Down Update - DF

Dan Foley

We have been on this one for a little over a year. We will have another 1-1/2 to 2 years to go. This is how it looked last September.

<A HREF="http://www.heatinghelp.com/getListed.cfm?id=262&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>

Dan Foley

Snowmelt

This is how it looked in March-April 2004 as we were installing 12,000 sq. ft. of snowmelt is the motorcourt and steps.

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

Dan Foley

Boilers

We went back last week to set the boilers - four Thermal Solutions modulating gas boilers - 500k BTU/each. We will be piping this boiler room for the next several weeks.

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

Dan Foley

The House

They are making steady progess on the main house, guest house and art gallery/studio. The scheduled completion date is January 2006.

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

Paul Pollets

Wow!!

this is some project. Very cool. How'd you make the boiler selection? Can't wait to see the continued "work in progress"...

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

Dan Foley

Boilers

Hi Paul,

The original boilers specified were four Hydro-Pulse boilers. I managed to get the specs changed to four Vitodens with a cascade control. Then they added 12,000 square feet of snowmelt.

I suggested a Vertomat with a modulating burner but the specs required redundancy and their was insufficient room for two Vertomats. I have used the Thermal Solutions before with good results. While they are non-condensing, they still operate at 87% AFUE. -DF

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"