Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Time for the big pipe
doug_16
Member Posts: 62
As work progresses, the near piping is started. Never realized Taco made such large parts, I am standing on the 7th step for the picture.
0
Comments
-
they make a 4 way
with a vortex and its sorta gert mixer...looks cool:)
0 -
Air separator
It's nice to see that you've supported the air separator independantly of the piping. And not by the lift ring either!!
Good looking job.
Paul B.0 -
that stuff is very well HUNG!0 -
Keep posting!
Doug, I'm currenty doing a very similar job, although I don't have a) camera, & b) if I had the camera, wouldn't know how to post the pics...Keep um coming! Some day (hopfully before I'm a DEAD MAN myself, this too will change). Looks good....Robert O'Connor/NJ0
This discussion has been closed.
Categories
- All Categories
- 86.5K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 423 Carbon Monoxide Awareness
- 94 Chimneys & Flues
- 2K Domestic Hot Water
- 5.5K Gas Heating
- 101 Geothermal
- 156 Indoor-Air Quality
- 3.5K Oil Heating
- 64 Pipe Deterioration
- 927 Plumbing
- 6.1K Radiant Heating
- 383 Solar
- 15.1K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements