Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
More Beckett Training with your friend in the industry
Alan R. Mercurio_3
Member Posts: 1,624
I hope you'll join me in Virginia well I share some knowledge with our fellow technicians regarding Beckett burners.
Course Description:Program Content: This program will be presented in person by an experienced factory representative. The subject matter will be technical in nature, with strong emphasis placed on burner service and troubleshooting system problems. A very substantial technical manual will be presented to each person enrolled and in attendance. New Components: The program will feature the following new Beckett components: ·New Beckett PSC Motors ·New Beckett Electronic Igniters ·New Beckett Controls ·New Beckett CleanCut Pump · With the aid of a new Power Point presentation, the program will cover: ·Combustion theory ·Combustion chambers ·Chimneys and draft ·Combustion equipment and efficiency testing ·Highlighting the Beckett Model AF, AFG and AFII flame retention burners and accessories ·Service procedures during the seasonal maintenance ·Understanding, troubleshooting and correction of system problems: ·combustion ·chimney ·ignition system ·safety control system ·fuel unit & oil piping ·motors, fans and couplings
<b>You can join me at the following locations:
September 14, 2004
HOLIDAY INN CENTRAL
3207 NORTH BLVD.
RICHMOND, VA 23230
September 15, 2004
HOLIDAY INN WILLIAMSBURG
814 CAPITOL LANDING ROAD
WILLIAMSBURG, VA 23185
September 16, 2004
HOLIDAY INN SELECT
1570 NORTH MILITARY HIGHWAY
NORFOLK, VA 23502</b>
Each location will only cost you $85.00 Or you can save yourself <b>10 Bucks!</b> If go to R.W. Becketts web site right now and register <a href="http://www.beckettcorp.com">R.W. Beckett</a>
A little tip, Norfolk and Richmond are filling up quick.
I look forward to seeing you there.
Your friend in the industry,<BR>Alan R. Mercurio<BR><BR><a href="http://oiltechtalk.com">Oil Tech Talk</a>
Course Description:Program Content: This program will be presented in person by an experienced factory representative. The subject matter will be technical in nature, with strong emphasis placed on burner service and troubleshooting system problems. A very substantial technical manual will be presented to each person enrolled and in attendance. New Components: The program will feature the following new Beckett components: ·New Beckett PSC Motors ·New Beckett Electronic Igniters ·New Beckett Controls ·New Beckett CleanCut Pump · With the aid of a new Power Point presentation, the program will cover: ·Combustion theory ·Combustion chambers ·Chimneys and draft ·Combustion equipment and efficiency testing ·Highlighting the Beckett Model AF, AFG and AFII flame retention burners and accessories ·Service procedures during the seasonal maintenance ·Understanding, troubleshooting and correction of system problems: ·combustion ·chimney ·ignition system ·safety control system ·fuel unit & oil piping ·motors, fans and couplings
<b>You can join me at the following locations:
September 14, 2004
HOLIDAY INN CENTRAL
3207 NORTH BLVD.
RICHMOND, VA 23230
September 15, 2004
HOLIDAY INN WILLIAMSBURG
814 CAPITOL LANDING ROAD
WILLIAMSBURG, VA 23185
September 16, 2004
HOLIDAY INN SELECT
1570 NORTH MILITARY HIGHWAY
NORFOLK, VA 23502</b>
Each location will only cost you $85.00 Or you can save yourself <b>10 Bucks!</b> If go to R.W. Becketts web site right now and register <a href="http://www.beckettcorp.com">R.W. Beckett</a>
A little tip, Norfolk and Richmond are filling up quick.
I look forward to seeing you there.
Your friend in the industry,<BR>Alan R. Mercurio<BR><BR><a href="http://oiltechtalk.com">Oil Tech Talk</a>
There was an error rendering this rich post.
0
Comments
-
I highly recommend this course
especially if Alan is teaching it!
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting0 -
Thanks Steamhead, I appreciate the kind words.
Your friend in the industry,
Alan R. Mercurio
Oil Tech TalkThere was an error rendering this rich post.
0 -
north jersey
Hey alan when are you going to be in the northern jersey area would and always can use to learn more thanks and peace clammyR.A. Calmbacher L.L.C. HVAC
NJ Master HVAC Lic.
Mahwah, NJ
Specializing in steam and hydronic heating0 -
Have simulators will travel
Hey Clammy, thanks for asking. If I get a call from anyone in your area that is interested and we can make it work I'd be glad to head your way.Thanks again for asking.
Your friend in the industry,
Alan R. Mercurio
Oil Tech TalkThere was an error rendering this rich post.
0 -
Need a fix
Alan,
Like the clam man, I could use to attend one of your seminar/classes. Also in Jersey but at the beach in Ocean Cty. I would be willing to travel anywhere in the state though as I'm kinda centrally located. Please keep us here in N.J on the radar. Anxiously awaiting...
Tom0 -
Thanks Tom, I'll keep you locked in on the educational radar screen.
Your friend in the industry,
Alan R. Mercurio
Oil Tech TalkThere was an error rendering this rich post.
0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 64 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements