Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Time to Retire...?
don_45
Member Posts: 1
boiler was installed 1979, minimal if no maintenance
some pins have corroded off, left side tapping leaks,
right end section is similar, this boiler did not
have a flue liner.
saw this beast steaming during house inspection and
to spite this and the way it is piped bugger was quiet
and seemed to work okay, many other issues though,
amazing
Nick and his partner of A/C Sheet Metal ( certified sweeps )
did a great job, left the rest of the mud work for me to finish of more to do there.
last shot of the 262.5 and piping
some pins have corroded off, left side tapping leaks,
right end section is similar, this boiler did not
have a flue liner.
saw this beast steaming during house inspection and
to spite this and the way it is piped bugger was quiet
and seemed to work okay, many other issues though,
amazing
Nick and his partner of A/C Sheet Metal ( certified sweeps )
did a great job, left the rest of the mud work for me to finish of more to do there.
last shot of the 262.5 and piping
0
Comments
-
Well at least
the system looks like it has main vents... though I bet they're too small.
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 64 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements