Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Flooring Mfgr with \"blinders\"?
Options
Mark J Strawcutter
Member Posts: 625
Just had a new kitchen floor installed. Tarkett sheet vinyl. The installation guide talks about requirements when used with radiant heat, but it's in the "over concrete" section. No mention of radiant in the wood underlayment section.
I guess they haven't heard about the latest radiant installation methods :-)
They call for 85degF max floor temp (no surprise) but also say that tubing must be at least 2 inches away from the flooring material. Never heard that one before.
Mark
I guess they haven't heard about the latest radiant installation methods :-)
They call for 85degF max floor temp (no surprise) but also say that tubing must be at least 2 inches away from the flooring material. Never heard that one before.
Mark
0
Comments
-
Tarkett aint exactly New:)
its the stuff for sbg where who knows whats happening0
This discussion has been closed.
Categories
- All Categories
- 87.3K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 166 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements