Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Fin Tube

JIMBO_2
JIMBO_2 Member Posts: 127
in THE MAIN WALL
I'm looking for a few ideas on the best fin tube to install in a complete re-do, boiler, baseboard. Used to be hot-air heated. I'm thinking of going with an EK system. It's a 2 story house, 500 sq ft per floor. I'm not looking to get too crazy pricewize, unless the difference is truly worth the extra bucks. It's an attached house, so I figure to run fin tube under the windows, each room has two windows, and just leave the joining wall alone. Any thoughts will be gratefully appreciated.

Jimmy

Comments

  • George Peteya_2
    George Peteya_2 Member Posts: 72
    Fintube

    Jimbo, do a heat loss calculation before you do anything else! A FREE heat loss calculator is available from Slant/Fin. See "Free Heat Loss Calcs" on this site (see list on left of your screen). No matter whose baseboard you buy, you'll know it's sized properly.
  • Ken_8
    Ken_8 Member Posts: 1,640
    Jimbo,

    I agree. The heat load calc. is step one.

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
  • Matt Undy
    Matt Undy Member Posts: 256


    How long does it take slant fin to sned out the heat loss calculator? I filled in the request a couple weeks ago and haven't recieved the CD yet.

    Matt
  • George Peteya_2
    George Peteya_2 Member Posts: 72
    Slant/Fin Heatloss CD

    Matt, Slant/Fin is about ready to roll out Version 2 of Hydronic Explorer. The Corporate Office MAY have given out all of their Version 1 disks. I have a few left ... I'll be glad to send you one if you email me your address. When you get the disk, register it at http://trainingroom.slantfin.com and you'll get Version 2 as soon as it's ready.
This discussion has been closed.

Categories