changing the rough on baseboard

Wild Bill

on my baseboard rough on a three-building apartment renovation that is my job. I thought I have seen in some trade magazine some type of Flexi-corrugated metal type fitting that is somewhat like a "Fluidmaster" except for baseboard connections. Copper fittings might be too time consuming, and I don't have the room for pex adapters.
Thanks...Bill H.

Ken_8

Check with

Slant Fin. They have an expansion joint for HWBB that may fit.

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

hr

Slant Fin

used to offer these. Do they still Noel or Tom?

hot rod

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

ed broderick_2

slant fin flex fittings

If you can find an old supply house and then someone remember where they are, you are in luck. I found a few in an off the main drag supply house in Kingston, New York. Bring pictures when you go looking. Ed

Unknown

They were not made for a short time.

They are back, again. Any Slant/Fin wholesaler can get them. They are on the shelf, ready to go.

They are listed in the radiation book, with baseboard.

Noel

Slant/Fin Corporation

hr

You can buy 3/4\"

copper flex water heater connectors at most plumbing supply stores also.

hot rod

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"