Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Advanced Riello Course

Okay, so far this is a small but illustrious group, and not one to miss, FACT! I'll leave the seating open until 4/27, then that's it!

This will be our only Riello Advanced in Warren, RI this year, so.............you snooze, you lose!

Comments

  • S Ebels
    S Ebels Member Posts: 2,322
    Any seminars

    Closer to Michigan George? I have two techs I would like to send your way if the distance were within reach.

    Thanks
  • Weezbo
    Weezbo Member Posts: 6,232
    :)

    class worth taking:) we lucky here in Alaska the riello guy like 's us:)
  • Darin Cook_2
    Darin Cook_2 Member Posts: 205
    Best Burner on the Market!!

    > Okay, so far this is a small but illustrious

    > group, and not one to miss, FACT! I'll leave the

    > seating open until 4/27, then that's it!

    >

    > This

    > will be our only Riello Advanced in Warren, RI

    > this year, so.............you snooze, you lose!



  • Darin Cook_2
    Darin Cook_2 Member Posts: 205
    Best Burner on the Market!!

    What areas are hit harder than in the standard course? It is a bit of a drive (3.5 hours), but would consider it if it really went into some detailed information. I will say this for Riello, I bought the full service kit two years ago and only opened it once. That was to make sure everything was in it when I bought it. Riello raised the bar for Beckett and Carlin to follow.
  • Firedragon_4
    Firedragon_4 Member Posts: 1,436
    Nope, the peninsula is a bit far for me!

    I did some training in Alpena once though, but that was for the USAF!
  • Firedragon_4
    Firedragon_4 Member Posts: 1,436
    We do some stuff they

    don't do in their routine class. I've been around the burners since 1975 and went to the school in Italy in the 1980's, I think I'm the last one(?) around to do that.
  • Firedragon_4
    Firedragon_4 Member Posts: 1,436
    BTW, you're in Albany, right???

    Hang on, we're working on something up that-a-way. We also do them for VFDA in VT, that may be closer, I think??? We get a lot of guys from NY up there.

    Check this out, we post all of our seminars here: http://oiltechtalk.com/
  • John Jr
    John Jr Member Posts: 210
    What Dates?

    George what dates are the class and how much?
    What was your AFSC?

    John Jr
  • Firedragon
    Firedragon Member Posts: 13
    Class is April 29 in Warren, RI

    and all info is on my website at www.FirerdragonEnt.com

    My first AFSC was 54730 (Heating) then went to Red Horse 55550, and then went back to 54770 and came out as an E-6.
  • Firedragon_4
    Firedragon_4 Member Posts: 1,436
    Two more seats gone today, a few left

    but we take no walk-ins and close registration on 4/27, FACT!
This discussion has been closed.