Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Piping Arrangment?
Jamie_6
Member Posts: 710
I've started a nice little job today which consists of 7 rooms of cast Iron Baseboard, 2 radinat manifolds, a hot-water fan-coil, and a hot-water maker!
The Cast Iron B.B. is going to be piped back to a Wirsbo TrueFlow manifold and balanced there, then the two radiant manifolds, the hot-water maker and a hot-water fan-coil for the garage all have to be piped in.
Do you think this application really needs to be piped P/S or should I do some kind of Hybrid P/S.
Any help will be greatly appreciated.
Jamie
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=289&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
The Cast Iron B.B. is going to be piped back to a Wirsbo TrueFlow manifold and balanced there, then the two radiant manifolds, the hot-water maker and a hot-water fan-coil for the garage all have to be piped in.
Do you think this application really needs to be piped P/S or should I do some kind of Hybrid P/S.
Any help will be greatly appreciated.
Jamie
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=289&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
0
Comments
-
once you say radiant....
the three way mixers are probably gonna have Mood swings.0
This discussion has been closed.
Categories
- All Categories
- 86.5K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 423 Carbon Monoxide Awareness
- 96 Chimneys & Flues
- 2K Domestic Hot Water
- 5.5K Gas Heating
- 101 Geothermal
- 157 Indoor-Air Quality
- 3.5K Oil Heating
- 64 Pipe Deterioration
- 928 Plumbing
- 6.1K Radiant Heating
- 384 Solar
- 15.1K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 42 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements