Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Sarco (from the Library)
Options
Mike T., Swampeast MO
Member Posts: 6,928
"Presupposes a balanced system"
Since balance was difficult (then as now) they offered balancing valves to replace regular hand valve.
Note cost: $2.50 max
Note cost and shipping weight of plain reset valve & sensor: $150 minimum and 75 pounds minimum.
Is this why the idea died?
Since balance was difficult (then as now) they offered balancing valves to replace regular hand valve.
Note cost: $2.50 max
Note cost and shipping weight of plain reset valve & sensor: $150 minimum and 75 pounds minimum.
Is this why the idea died?
0
Comments
-
Still fascinated...
1943
HEIGHT of WW-II. Brass & iron going to shells and Shermans. LOTS of R&D, but devoted to war.
Approved by War Commission.
Why?
Because old Doc Jones could be more comfortable and burn less fuel!
0
This discussion has been closed.
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 418 Carbon Monoxide Awareness
- 73 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 150 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 850 Plumbing
- 5.8K Radiant Heating
- 372 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 39 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements