Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
elect.feed valve has a fried coil. need a replacement coil .
Options
john of Service Specialties
Member Posts: 5
Can any one tell me where to get a replacement coil,either 24 or 120 volt AC? Valve is 1974 but never used. It's been on our shelf. Installed it last week and it fried its coil & the 50va tranney powering it.
thanks, John (still learning greybeard )Helsel
thanks, John (still learning greybeard )Helsel
0
Comments
-
I'd go with the later model feeder
the WF-U-24 I believe. It has a brass valve assembly that won't rust up the way the iron body of the 101A will.
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting0 -
thanks, always appreciate your advise.
john
service specialties
Avella, PA0
This discussion has been closed.
Categories
- All Categories
- 87.4K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 167 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements