Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Installing 'new' old cast iron radiators
John_34
Member Posts: 35
I'm going to be installing cast iron radiators in an addition we're building. 5 rooms in all. Hot water heating, and I'd like to zone the new rooms and the rest of the existing house. How big should I drill holes to run the 3/4" copper tubing? Can anyone recommend a good book on the subject of zoning? Any other advice would be welcome as well, thank you!!
0
Comments
-
Start with these two books
from Dan: "How Come?" and "Pumping Away". These are two of the best I've seen on hot-water heating. You can order them on the Books and More page of this site.
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting0
This discussion has been closed.
Categories
- All Categories
- 86.5K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 423 Carbon Monoxide Awareness
- 96 Chimneys & Flues
- 2K Domestic Hot Water
- 5.5K Gas Heating
- 101 Geothermal
- 157 Indoor-Air Quality
- 3.5K Oil Heating
- 64 Pipe Deterioration
- 928 Plumbing
- 6.1K Radiant Heating
- 384 Solar
- 15.1K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 42 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements