Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Munchkin setup
Options
Al_3
Member Posts: 79
Set up one today using the lit that comes with the boiler,
4 zones plus an lb30 dhwt and a vision kit. Word to the wise on piping, make sure you pipe to the vision literature, not to the lit that comes with the boiler. I think HTP should put a notation in their boiler lit to warn that the vision piping diagram is different than the lit packaged with the boiler. My own fault, but a notation in their lit could have saved me some time and $. Just a thought
4 zones plus an lb30 dhwt and a vision kit. Word to the wise on piping, make sure you pipe to the vision literature, not to the lit that comes with the boiler. I think HTP should put a notation in their boiler lit to warn that the vision piping diagram is different than the lit packaged with the boiler. My own fault, but a notation in their lit could have saved me some time and $. Just a thought
0
This discussion has been closed.
Categories
- All Categories
- 87.6K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 59 Biomass
- 430 Carbon Monoxide Awareness
- 125 Chimneys & Flues
- 2.2K Domestic Hot Water
- 5.9K Gas Heating
- 121 Geothermal
- 170 Indoor-Air Quality
- 3.8K Oil Heating
- 78 Pipe Deterioration
- 1K Plumbing
- 6.6K Radiant Heating
- 396 Solar
- 16K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 51 Job Opportunities
- 18 Recall Announcements