Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

fabriacted a steam radiator for small bath

I had need for a small radiator in my co-op apt in Baltimore, which had been removed and was not hiding anywhere in the property. So...I attached a new brass angle valve comming out of the floor and got an old piece of 2 " pipe 24 inches long and attached a couple of really nice old cast 3/4" x 2" reducing ells at each end. I attached one end to the valve and reduced the other for the vent and violia! Works purrrfectly.
This discussion has been closed.