Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
IPS conversion

ML
Member Posts: 7
Does anyone know where I can find a chart that would allow me to convert th O.D. of threaded iron pipe to the IPS.
0
Comments
-
IPS conversion
Does anyone know where I can find a chart that would allow me to convert the O.D. of threaded iron pipe to the IPS.0 -
Pocket Ref
by Thomas J. Glover, pp 344-349 (2nd Ed.) covers dimensions and weights of 1/8" thru 42" (though for 14" and larger O.D. = nominal) steel pipe of all schedules. Tons of other general information too.
Available here, or any bookstore:
http://www.heatinghelp.com/shopcart/product.cfm?category=2-220
This discussion has been closed.
Categories
- All Categories
- 86.6K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 54 Biomass
- 423 Carbon Monoxide Awareness
- 100 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 101 Geothermal
- 158 Indoor-Air Quality
- 3.5K Oil Heating
- 66 Pipe Deterioration
- 934 Plumbing
- 6.2K Radiant Heating
- 384 Solar
- 15.2K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements