Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Reworked steam header and new boiler

Steamhead
Steamhead Member Posts: 17,380
in THE MAIN WALL
that "before" pic was a great example of how NOT to install a drop header.

<A HREF="http://www.heatinghelp.com/getListed.cfm?id=157&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Contractor"</A>
All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting

Comments

  • Lou S.
    Lou S. Member Posts: 8
    Fixed two problems at once

    Stumbled across this 25 yr old Weil Mclain steamer that had 6 of it's 12 sections rotted through, plus if you look hard you can see the bull-headed steam main. Just fired up the new install today and it runs like a champ. Still have to insulate and rework the t&p properly.Couldn't of done it without all of the helpful information from this site, my Burham heating helper and especially my buddy Frank, who directed me to this web site to begin with..
This discussion has been closed.

Categories