Just fits..............hb

heatboy

we only had to spend two days on our knees finishing this, well, almost finished. This panel is up on the scond floor over the office area of a small commercial project. We had about 4-8" to get the panel against the wall.

5000 square feet of concrete radiant with tube centers from 15" to 6". We tubed the slab in the middle of January. Brrrrrr!

The owner is moving his machine shop into this building and when I showed him what the Vitodens can do, he had to have it.

hb

<A HREF="http://www.heatinghelp.com/getListed.cfm?id=304&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>

Mike Kraft_2

as usual

another masterpiece!Is that slab shield?And how did the diamond plate hold up in the pour?Very clean.

cheese

Al_3

Wirsbo manifolds

Just installed our first flowmeter manifolds last week, the job is not ready yet for trim out or boiler install yet, just wondering how well you like the manifolds and the high tech gadget you need to test them ?Just for kicks, what did you have to pay for the test meter,just checking to see if my supplier is being honest.

Paul Pollets

Nice!!

Like the idea of piping the LLH high, good place for the LWCO. Why didn't I think of that??
Good lookin' job...of course!!

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

heatboy

No, it's Insultarp, Mike.

You will notide there is a curb poured all the way around the building with polystyrene on the inside extending down 4' with Insultarp under the entire slab.

We had the manifold panel wrapped in plastic during the pour with just the air pressure gauges protruding. The entire slab was pumped so there was no worry about wheelbarrows being tipped right on the tube.

hb

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

heatboy

Actually,

> Just installed our first flowmeter manifolds last

> week, the job is not ready yet for trim out or

> boiler install yet, just wondering how well you

> like the manifolds and the high tech gadget you

> need to test them ?Just for kicks, what did you

> have to pay for the test meter,just checking to

> see if my supplier is being honest.





To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

heatboy

Actually.........

I didn't pay anything. The Wirsbo Advantage Members were offered them for free if they purchased a certain amount of Tru-Flow manifolds. I purchased enough manifolds for a couple of projects and ended up with two meters at no cost.

hb

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

clammy

beautiful stuff

awesome stuff super neat and top of the line my hats off to you heatboy the diamond plate really sends it over the top once again outstanding work done by a true craftmans who ain't afraid to show how it should all be lookin ,great stuff again truely all ways enjoy viewing your work it's like seeing art work, true mechinacal art work! peace and keep up the excellent work

Cosmo_3

major problem

I don't know what to do with all the salivatory products your pics create!!!! Running out of paper towels.... Beautiful stuff. Is this the job you tried the clip tie tool on?

Cosmo Valavanis
Dependable PHC Inc

heatboy

Yep, and thank you.........

for letting me try it. It worked OK, for the most part and it did make Jason's job easier. I was the guy bent over all day tying the corners and turn arounds. After all, I am so much younger than he is ;-)

hb

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

ScottMP

My little propress pal

Sweet lookin work as always Jeff.

Keep up the Great Work.

Scott

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"