Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Burnham Baseray Baseboard

Van Member Posts: 11
Are the end caps still available for the Burnham Baseray cast iron baseboard? I could not find them on the Burnham website. I am planning a job and need right and left end caps as well as inside corner pieces to make both 90* and 45* angles.


  • Pat_11
    Pat_11 Member Posts: 49
    9A end caps

    Baseray accessories are listed in the trade price book (Page 41). Call your local Burnham wholesaler for a copy. End caps are avaible.
  • Van

    As Pat said, these are available for the 9A Series Cast Iron Baseboard. This series is 9"+ in height. If you are looking for accessories for the older 7" high baseboard, they have been long out of production and are no longer available. Hope this helps.

    Glenn Stanton

    Burnham Hydronics
This discussion has been closed.