Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
gatering tips for posting to the wall
jerry scharf
Member Posts: 159
I saw a comment a couple days ago that someone wanted to figure out how to make a link clickable. I can help that, but I thought that there would be other handy things to gather as well, so I started this thread.
The way the messages on the wall work, they will interpret HTML commands in line. If you've ever quoted another post, you've seen it.
The basic HTML for a link looks like br
<anbspHREF="http://www.heatinghelp.com">our favorite hydronics site<a>br
where the thing after the HREF is the place to go to and the thing between the > and < is what to display as the link.
The result looks like<a HREF="http://www.heatinghelp.com">our favorite hydronics site</a>
jerry
The way the messages on the wall work, they will interpret HTML commands in line. If you've ever quoted another post, you've seen it.
The basic HTML for a link looks like br
<anbspHREF="http://www.heatinghelp.com">our favorite hydronics site<a>br
where the thing after the HREF is the place to go to and the thing between the > and < is what to display as the link.
The result looks like<a HREF="http://www.heatinghelp.com">our favorite hydronics site</a>
jerry
0
Comments
-
how to make a clickable link in a message
I saw a comment a couple days ago that someone wanted to figure out how to make a link clickable. I can help that, but I thought that there would be other handy things to gather as well, so I started this thread.
The way the messages on the wall work, they will interpret HTML commands in line. If you've ever quoted another post, you've seen it.
The basic HTML for a link looks like br
<aHREF="http://www.heatinghelp.com">our favorite hydronics site<a>
where the thing after the HREF is the place to go to and the thing between the > and < is what to display as the link.
The result looks likeour favorite hydronics site
jerry
0 -
how to make a clickable link in a message
I saw a comment a couple days ago that someone wanted to figure out how to make a link clickable. I can help that, but I thought that there would be other handy things to gather as well, so I started this thread.
The way the messages on the wall work, they will interpret HTML commands in line. If you've ever quoted another post, you've seen it.
The basic HTML for a link looks like br
<a HREF="http://www.heatinghelp.com">our favorite hydronics site<a>
where the thing after the HREF is the place to go to and the thing between the > and < is what to display as the link.
The result looks likeour favorite hydronics site
jerry
0 -
how to make a clickable link in a message
I saw a comment a couple days ago that someone wanted to figure out how to make a link clickable. I can help that, but I thought that there would be other handy things to gather as well, so I started this thread.
The way the messages on the wall work, they will interpret HTML commands in line. If you've ever quoted another post, you've seen it.
The basic HTML for a link looks like:
<a HREF="http://www.heatinghelp.com">our favorite hydronics site<a>
where the thing after the HREF is the place to go to and the thing between the > and < is what to display as the link.
The result looks likeour favorite hydronics site
jerry
0 -
how to make a clickable link in a message
I saw a comment a couple days ago that someone wanted to figure out how to make a link clickable. I can help that, but I thought that there would be other handy things to gather as well, so I started this thread.
The way the messages on the wall work, they will interpret HTML commands in line. If you've ever quoted another post, you've seen it.
The basic HTML for a link looks like:
<a HREF="http://www.heatinghelp.com">our favorite hydronics site<a>
where the thing after the HREF is the place to go to and the thing between the > and < is what to display as the link.
The result looks likeour favorite hydronics site
jerry
0 -
how to make a clickable link in a message
I saw a comment a couple days ago that someone wanted to figure out how to make a link clickable. I can help that, but I thought that there would be other handy things to gather as well, so I started this thread.
The way the messages on the wall work, they will interpret HTML commands in line. If you've ever quoted another post, you've seen it.
The basic HTML for a link looks like:
<a HREF="http://www.heatinghelp.com">our favorite hydronics site<a>
where the thing after the HREF is the place to go to and the thing between the > and < is what to display as the link.
The result looks like our favorite hydronics site
jerry
0 -
how to make a clickable link in a message
I saw a comment a couple days ago that someone wanted to figure out how to make a link clickable. I can help that, but I thought that there would be other handy things to gather as well, so I started this thread.
The way the messages on the wall work, they will interpret HTML commands in line. If you've ever quoted another post, you've seen it.
The basic HTML for a link looks like:
<a HREF="http://www.heatinghelp.com">our favorite hydronics site<a>
where the thing after the HREF is the place to go to and the thing between the > and < is what to display as the link.
The result looks like our favorite hydronics site
jerry
0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements