Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Copper Pipe Finish
Options

Jerry Boulanger_2
Member Posts: 111
a finish I can apply to bare copper pipe so that it doesn't oxidize and get dark and dirty looking. It's for a demo unit I've had built - I'll be using it for training and sales demonstrations and I want it to stay looking good. Picture attached.
0
Comments
-
A friend of mine made a small bar in his house with 2" copper and glass. I think he used polyuerthane or laquer in a spray can to keep the pipe shiny.0 -
How about copper colored spray paint.(Soory,I couldn't resist)When is you next course?0 -
clean copper
use a product called citronox cleaner to make your pipes and fittings shine like new. then get some chese cloth and a small can of spray clear laquer and just rub it in. I have had very good results with this method on old ships hardware some going on 5 years and still look like new0
This discussion has been closed.
Categories
- All Categories
- 87K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 116 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 107 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 983 Plumbing
- 6.3K Radiant Heating
- 389 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 48 Job Opportunities
- 18 Recall Announcements