Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Boiler Installation

bill_21
bill_21 Member Posts: 1
in THE MAIN WALL
people tend to over complicate things. if your half competent you can install a boiler(yes of course pumping away). heres some advice stick with hot air it really is the best

Comments

  • etp66
    etp66 Member Posts: 5
    How to install boilers

    I am interested in installing low pressure boilers for my customers and would like any information on training or books. I have been servicing and installing all types of forced air heating systems for 10 or more years. Looking to expand. THANKS!
  • Mad Dog
    Mad Dog Member Posts: 2,595
    They really are 2 seperate trades

    where do we start? You need to start with basic books and courses offered here at BOOKS and More. I assume you can wire? Solder? Do yourself a favor go real slowly in to this. You should look in to getting licensed as such. Stay away from Steam boilers until you've mastered simple hydronics. Why the change? Do you realize how long it will take you to become competant enough to make $$$ at it? Good Luck Mad Dog

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Contractor"
  • Steve Minnich_1
    Steve Minnich_1 Member Posts: 127
    MAD DOG

    How ya doing buddy? Come on, this stuff is not rocket science. It's down right fun! I think everyone should try and learn as much as they can. Go for it, but do it right, we're all watching.

    Steve

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Contractor"
  • Bill Herhold
    Bill Herhold Member Posts: 2
    New Boiler Installation

    The advent of new and very efficient hydronic heating equipment, hydronic accessories, and the growth of interest in radiant heat has interested many contractors in the benefits of this technology. We welcome your interest. I suggest the best approach to the knowledge desire would be by contacting the I=B=R Hydronic division of GAMA for their upcoming classes and locations. They offer classes that cover both residential or commercial boiler installation training from people with years of experience in the industry. They are well presented, interactive, and thorough. Go to the web site www.bnp.com/conferences for class information. And....welcome to the industry. BH






  • Unknown
    Unknown
    Bill Herhold - have you actually

    attended the IBR Hydronics Class that is presently being presented?
This discussion has been closed.

Categories