Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
No heat in Underfloor
Justin Gavin
Member Posts: 129
I have a house that we installed 5 underfloor zones. We are running a 180 primary loop using a Tekmar 363 Mixing control.
One loop seems to be noticebly colder in the morning.
I am getting only about a 5 degree Delta T through the loop. I have the loops set at .5 gpm per circuit.
Anyone have any thoughts.
Thanks in advance,
Justin
One loop seems to be noticebly colder in the morning.
I am getting only about a 5 degree Delta T through the loop. I have the loops set at .5 gpm per circuit.
Anyone have any thoughts.
Thanks in advance,
Justin
0
Comments
-
probably airbound0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements