Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Help! Cant find threaded monoflo tee's

Jason Roberts
Jason Roberts Member Posts: 11
in THE MAIN WALL
I'm putting together a one pipe hot water system with threaded iron pipe. I've checked into Taco's Venturi tee (not available in threaded) Bell & Gossett's Monoflo tee (not available in threaded) Even Armstrongs have only sweat fittings.Ideally
I'd like to get iron fittings. I'm even tempted to make my own by inserting a reducer or a washer into a threaded tee but not sure it will perform.Any suggestions?

Comments

  • Boilerpro_3
    Boilerpro_3 Member Posts: 1,231
    I've got a source..... Email Me

  • Jason Roberts
    Jason Roberts Member Posts: 11
    Threaded Monoflo

    Hi Bill,
    I need 1 1/4" x 3/4. Approximately 16 pieces or 32 depending on the final design. I'm putting cast iron baseboard downfeed about 10" from the main.
    I'm in Toronto
    Thanks
  • bigugh_4
    bigugh_4 Member Posts: 406
    Look at this site

    WatsonMcDaniel.com then speciality products then suction tee
This discussion has been closed.

Categories