Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
dual fuel power burners
kevin mulligan
Member Posts: 2
looking for book(s) on setup ,tuning,trobleshooting etc.. for these type of systems. work on a number of powerflame c and j burners.also a few webster,gordon pratt,and others. factory manuals are ok. give basic info,but no real indepth info. looking for info written in laymens terms,not something geared to engineers.local factory reps don't offer much assistance.any info would be helpful. also any info on hands on classes for these burners would be appreciated. thanks
0
Comments
-
power dual fuels
Set up many of these, primary thing to consider is base fuel. Unless the boiler has very expensive digital controls like weishaupf or some others, you have to set up to the main fuel source and then get as close a match to the back up fuel as possible. If you want further specifics, e mail me.0
This discussion has been closed.
Categories
- All Categories
- 86.5K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 423 Carbon Monoxide Awareness
- 96 Chimneys & Flues
- 2K Domestic Hot Water
- 5.5K Gas Heating
- 101 Geothermal
- 156 Indoor-Air Quality
- 3.5K Oil Heating
- 64 Pipe Deterioration
- 928 Plumbing
- 6.1K Radiant Heating
- 384 Solar
- 15.1K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements