Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
How do I calculate how much water is in column and tube rads
Gene Cataldo
Member Posts: 3
How do I convert the squre feet of radiation, so that I can calculate the gallons of glycol needed in a newly converted gravity system to a forced hotwater system. There is currently column style radiation and tube radiation
0
Comments
-
Average volumes
IN PINTS! AND PER SQUARE FOOT OF EDR!
Column rad: 1.5
Flue rad: 1.75
Thin-fin tube: 0.8070
This discussion has been closed.
Categories
- All Categories
- 86.8K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 109 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.6K Gas Heating
- 105 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 966 Plumbing
- 6.3K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements