Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

slab prep

ChrisL
ChrisL Member Posts: 121
in THE MAIN WALL
I've got a quick question: On a radiant slab, does there need to be any sleeves where the pex exits the floor? I know I need a sleeve by an expansion joint, but not sure about where it comes out of the slab.

Thanks,

Chris

Comments

  • brian_25
    brian_25 Member Posts: 16
    slab

    we always have used sleaves when exiting a slab, i do rember seeing it someware in a manual. on 3/4 pex we use 1-1/4 conduit sweeps. hope this helps.
This discussion has been closed.

Categories