Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Circ. placement
Options
kevin coppinger_4
Member Posts: 2,124
a series of circ. on a existing job (on the Return) will is mess up the whole job when then all ,or some, of the circs . on the new part were/are put on the supply side??? I have one radiant zone that will be a bear to pipe if the circ. is on the return...kpc
0
Comments
-
Sounds like...
an opportune time to straighten out a long standing mess to me:-)
There is no right way to do things wrong...
Pump away from the PONPC with all the pumps and life will be ducky!
ME0 -
ME!!!!
"There is no right way to do things wrong"
My next tattoo!!!!
How bout them Munchies!!!!!!!!!!!
Mark H
To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"0
This discussion has been closed.
Categories
- All Categories
- 87.3K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 166 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements