Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Does anyone here know how to do a heat loss/gain for a computer

HP80 Member Posts: 55
I am wondering if there are any general rule of thumb(s) for sizing a computer room these days?
Or do you have to do a complete load?


  • Steve Ebels
    Steve Ebels Member Posts: 904
    See if

    You can get specs on power consumption for all the equipment in the room. Convert watts of power into btu's and that should give you at least an approximate place to start. 1 watt = roughly 3.3 btu's
  • Boilerpro_3
    Boilerpro_3 Member Posts: 1,231
    That was my thought, Steve, plus add people load....NM

This discussion has been closed.