Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Taco zone valves - discontinued parts

Christian Sweningsen
Christian Sweningsen Member Posts: 1
in THE MAIN WALL
We are a residential care community for developmentally disabled adults, in upstate NY. We have 50 buildings, including 21 care homes. Most building have Taco 551 zone valves. I have been told by Taco that they no longer manufacture parts for these valves. Anyone know of a source for parts? Our plumber is already very busy; replacing parts instead of knocking down systems to replace valves, would help a lot!
We are not state-run, and not geared to wealthy folks, so we try to maintain what we have.

TIA, Christian

Comments

  • J.C.A._3
    J.C.A._3 Member Posts: 2,980
    If your in N.Y. ......

    Find the nearest Sid Harvey. They seem to have parts longer than almost anyone I've searched . I believe they also "rebuilt" the heads for these. Sparco may also make one ! Good luck. Chris
This discussion has been closed.

Categories