Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
first drop header
clammy
Member Posts: 3,162
R.A. Calmbacher L.L.C. HVAC
NJ Master HVAC Lic.
Mahwah, NJ
Specializing in steam and hydronic heating
0
Comments
-
here it is my first drop header went in quite easy was a breeze piped the whole thing in about 6 hours started up and ran with no surging and no banging a real pleasure the drop did make it all come together much easier cleaned hewr and top skimmed her tommorow new rad vents and that all she wrote i don't think the radators have been this hot in 20 years didn't get photo of the old boiler she was a mae west the origanal for the house dating around the late 40's really dirty the return tappings and the boiler it's self where just filled from years of never being flushed pressuretrol was set at 1 cut in dif at 5 i laughedand drop the new one down to1/2 and 1 hope you enjoy the photoR.A. Calmbacher L.L.C. HVAC
NJ Master HVAC Lic.
Mahwah, NJ
Specializing in steam and hydronic heating0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements