Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
The Forgotten Art
Bud_14
Member Posts: 200
No shop should be with out this manual...all we talk about in the manual, is sheet metal layout. Too much to list. Free updates for as long as we're on line (with the exception of architectural metal layout)however we reserve the right to impress you.This past month I've already added approx 30 pages putting it at nearly 200 pages strong and we've only just begun. Your cost $40.00 plus $7.00 shipping and handling = $47.00
Mention that you found us on The Wall and I'll include a nice littl high quality compus for you to get started with the lessons.
Send check or money order payable to
The Sheet Metal shop Resource Center
516 Chicago Ave.
Waukesha, WI 53188
Mention that you found us on The Wall and I'll include a nice littl high quality compus for you to get started with the lessons.
Send check or money order payable to
The Sheet Metal shop Resource Center
516 Chicago Ave.
Waukesha, WI 53188
0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements