Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
peerless pinnacle and indirect
Options
harvey
Member Posts: 153
I have sold a job {radiant} using a pinnacle{munchkin} boiler 199,000 btu and an 80 gal indirect DWH. I have heard that pinnacle does not have a control that will work with the indirect. Any ideas??? Thanks
0
Comments
-
Pinnacle
I was able to talk to Jeff Cook (Munchkin Man)at Wetstock III in Denver and was please to find out the following:
Peerless will also have the Vision control available soon. This control will add a feature that will ramp up the temp to satisy the DHW load and then default back to the set temp for your zone heating temps. I am looking forward to it as well.
After finally meeting Mike Miller from Tekmar at Wetstock III, I am excited about some new controls coming out in the Spring (?) and always like to incorporate their products, but at any rate, the vision control will be a highly complimentary addition for the pinnacle boiler.
PR0
This discussion has been closed.
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 418 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 847 Plumbing
- 5.8K Radiant Heating
- 371 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 38 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements