Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Old boiler installation instructions

Steamhead
Steamhead Member Posts: 17,387
in THE MAIN WALL
Glenn Stanton at Burnham. Burnham bought the American-Standard boiler line about 1970 or thereabouts. They just might have something on your A-S. You can e-mail Glenn at gstanton@burnham.com .

How about taking a picture and posting it here?

As for codes, these vary from place to place. Once we determine the age of your boiler, check with your local code authorities.

Are you having a problem with your boiler or heat system? If so, check out the Find a Contractor page of this site to locate someone who can help you.

<A HREF="http://www.heatinghelp.com/getListed.cfm?id=157&Step=30">To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"</A>
All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting

Comments

  • John1961
    John1961 Member Posts: 10
    Old boiler installation instructions

    I have an American Standard boiler model 1-%W (Serial number 21659).

    It looks like a late 50's or early 60's boiler.

    Do you know where I can get a copy of the installation instructions for this boiler?

    Also, what code was in effect during this installation?

    There was an error rendering this rich post.

This discussion has been closed.

Categories