Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Big News for LI HVAC contractors
TGO_29
Member Posts: 1
We all know hydronic heat is the best - but even a wet head needs a little tin sometimes ;) Remington Sheetmetal is now THE place for all your sheetmetal fabrication needs. Located right off Vets Highway in Ronkomkoma is the new home of "Uncle Pete" and "Cousin Danny". Now you too have relatives in the sheet metal fabrication business. Not sure what you need or how to procede? No problem! Your Uncle Pete will come out and measure for you! Save these numbers (631)981-3748 or FAX (631)981-3856.
Mention you heard about them on the wall and receive a 5% discount on your first order.
Mention you heard about them on the wall and receive a 5% discount on your first order.
0
This discussion has been closed.
Categories
- All Categories
- 86.5K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 423 Carbon Monoxide Awareness
- 95 Chimneys & Flues
- 2K Domestic Hot Water
- 5.5K Gas Heating
- 101 Geothermal
- 156 Indoor-Air Quality
- 3.5K Oil Heating
- 64 Pipe Deterioration
- 928 Plumbing
- 6.1K Radiant Heating
- 384 Solar
- 15.1K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements