Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Hanging insulated copper tube

Murph'_4
Murph'_4 Member Posts: 209
in THE MAIN WALL
would be less time than sorting through repair vs. stop couplers!! alot of the fifteys era homes are done that way. nice work !! and nice toys err, I mean tools. how 'bout that tool link Mr. Rohr ??



Murph'

Comments

  • hot_rod
    hot_rod Member Posts: 23,839
    This job

    will be a Slant Fin baseboard system. My son, Max, and I nailed a row of Sioux Chief PVC hanger, slid the insulation over the copper, then dropped the assembly into these 2" hangers.

    A quick, neat, inexpensive way to support long copper runs and allow noise free movement.

    Notice the copper was bent with my REMS Curvo, The ends were sweged with the REMS expander tool, also. We went fitting free today!

    hot rod
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • Richard D._2
    Richard D._2 Member Posts: 156
    Hey

    Hot Rod, Looks great and what a good Idea...How much X-tra time to swedge pipes??Is that M pipe?? Easy to swedge?I thought about swedgeing but never went there,like the insulation idea to!!!
    Richard
This discussion has been closed.

Categories