Garage Vitogas w Asst Rads-PGP

Paul Pollets

Finds us finishing this garage installation of a Viessmann Vitogas 100 stacked on a Horicell 53g DHW Tank. The Vitoronic 200 does the outdoor reset. This remodel ditched the original electric wall heaters for Buderus wall panel radiators and Runtals in the new addition. We thought the Oventrop trim works well with the Runtal towel bar rads. Via Chris Rorke (see Wetstock III) The chimney was a challenge with a 17ft offset. The owner preferred us to run the offset outside the residence and under the deck using B-Vent, to avoid any interior soffit. We didn't want poor chimney performance so.... The venting was then insulated with 1" wall MicroLok and Zeston fittings and PVC Cover. Cool Eh? What color should the bollards be?? I think Viessmann should make Bollard Covers with Logo, of course.

<A HREF="http://www.heatinghelp.com/getListed.cfm?id=104&Step=30">To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"</A>

Mark Eatherton1

A work of ART...

Great job as usual Paul. I love the non knee wracking TRV on the towell rack.

Keep up the great work.

ME

ScottMP

And thats the way

It supposed to look.

Texts book work.

Scott


To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"

Paul Pollets

Thanks!

Thanks Mark and Scott....Viessmann installers may notice we've modified the safety header to accept a low water cutoff. We would like to see a tapping for the LWCO on their boilers, or safety headers, especially the Vitodens. We've come up with a way of piping in a LWCO off the top of the Vitodens, I'll post the project next week with header details.

To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"

tim smith1

vitodens

Nice looking job Paul.

Dan Foley

Nice.....

Nice clean work, Paul. I like those Oventrop valves. Any concern about draft with the long offset? See you in Denver. -DF


To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"

Paul Pollets

Draft

Tests out -.02, just like it's supposed to be... see you at Wetstock III.

To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"