Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
How do I find someone to install a Monitor FCX?
Will_3
Member Posts: 11
I need to replace a very old boiler in my house (2200sq ft, 2 story, rads with circulator on a gravity system, Eastern Mass).
When I call around most oil folks only work with those whom are customers (I've been burning wood in an outdoor furnace running through an exchanger I piped into the existing system). Even then they have their preferences.
Thanks for any help.
When I call around most oil folks only work with those whom are customers (I've been burning wood in an outdoor furnace running through an exchanger I piped into the existing system). Even then they have their preferences.
Thanks for any help.
0
Comments
-
Check find a contractor
I think Old Yankee or Milne Plumbing are near you.
0 -
If still no luck...
Let me know. My # is 610-758-9005. I have connections with a lot of plumbers in that area.
Matt0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 64 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements