Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Boiler replacement in a closet

Unknown
Unknown
in THE MAIN WALL
In a beautiful basement , with a bar , pool table , office , and wrap around couch with a big screen TV - all within 20 feet of the boiler room doors . Makes me wonder all the time why the design of most houses doesnt include a separate room for all the mechanicals - maybe even a separate entrance . The other 2 pics are of the entrance into the basement - the only way to get the new Burnham down this way was to carry it , so we went another way .

Comments

  • Unknown
    Unknown
    I think this was a V85

    but I cant remember . It was 7 zones icluding a Phase 3 indirect , so we had 2 days to complete it - this was after day one with me , Dave and Brian . We only carry up to a 6 zone relay , so for a priority we use the single relay - these Taco controls are very versatile .
  • Unknown
    Unknown
    Beautiful Job Ron

    That was a lot of work to do in a single day. Great job once again!

    Glenn
  • J.C.A.
    J.C.A. Member Posts: 349
    Nice job Ron.


    I think we should start calling Ron "Shoehorn"!

    There's just no other way to decribe what you do , with the allotted space .(being able to make it look nice is cream!) Great work ! Chris
  • Steve Ebels
    Steve Ebels Member Posts: 904
    Hey Shoehorn

    What do you do for combustion air in a semi-enclosed space like that?

    GREAT WORK as usual!!
  • Unknown
    Unknown
    This was a job

    where everything was falling into place . I was suprised at how far we got . Thanks Glenn .
  • Unknown
    Unknown
    Hey , \" Shoehorn \"

    is alot better than what I've been called before . But I would take a nice , big , open basement in a hot second . Thank you Chris .
  • Unknown
    Unknown
    There was a louvre vent

    cut in to the left - where the indirect is sitting . I think it was around 2 by 5 - combined with the gap around the folding doors , it should be plenty . Thank you Steve .
  • jim f
    jim f Member Posts: 182
    nice work ron

    i like the way you utilized those 4 way tees to dispurse the manifolds.
    very nice work
    jim f.
  • Unknown
    Unknown
    Yes , those 4 way tees

    do come in handy . I asked about trying the manifolds from Lee Brooks , but it fell on deaf ears . Thank you Jim .
  • John@Reliable_2
    John@Reliable_2 Member Posts: 104
    What's the big deal here Ron?

    Compared to the space you are used too, all three guys could fit in there! LOL John@Reliable
  • ScottMP
    ScottMP Member Posts: 5,883
    Shoehorn

    Not only did you have room for three of you BUT you could stand up. This job must have been a treat for you !!

    Thanks for posting some more pictures, your work is an insperation for others. Hey Glenn how about some tech book photos ?

    Scott

    To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"
This discussion has been closed.

Categories