Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
The signature system
Josh M.
Member Posts: 359
I have a situation right now that would greatly benefit from an article that John Sigenthaler wrote about a while back called the signature system. They used the hot water in the tank to heat the domestic hot water in the coil of the inderect fired HWT. Does anyone have a way I can size this out? Or even a inderect HWT they would recommend for this situation?
0
Comments
-
most manufactures
list their equipment as to GPh/Temp rise. just look up the ratings according to brand and go for it
bigugh
0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements