Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

new diverter tee system

Options
jim f
jim f Member Posts: 182
in THE MAIN WALL
i am re-piping a hot water cast iron sytem. 3 floors of radiators on one zone. all the piping comes to the basement. i am changing this house to a 3 zone system with each floor to have its own thermostat. i understand the mono flow type piping arrangements, but the way it is pipe now is 2" off the main then has a t-wyewith 2" to one side of the house adn 2" to the other side. if i split this up to 3 zones thats a lot of piping. my question is can i tee the loops to go in both directions like the original piping arrangement times 3. or do i have to run a seperate loop for each zone around the house to pick up all my radiators. wow this is hard to describe. any ideas??
thanks alot for any input
jim franze
tri-city heating and cooling

<A HREF="http://www.heatinghelp.com/getListed.cfm?id=276&Step=30">To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"</A>
This discussion has been closed.

Categories