Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Emissions & Fuel Savings

Options
Mike Gray
Mike Gray Member Posts: 3
in THE MAIN WALL
I would like to offer you some information about my product for oil-fired burners. The device, Rentar Fuel Catalyst installs inline prior to the nozzle of the burner. In the field we have 3rd party test results from the State of Delaware were we have shown over 7.5 percent fuel saving as measured on a flow meter and an increase of three percent effcentcy on an IC 9.4mm BTU MEG 54.
>
There was also 16% reduction in NOx and upwards of 40% reduction in other organic materials. It is my believe that the fuel savings component is the selling point unless the client needs to reduce emissions for CAA consideration.
>
> All of our sales have, to this point, been on diesel engines in trucks. And we have lab results showing increased horsepower and fuel savings on the trucks as well as a reduction in opacity.
>
> It is my initiative to move into the oil burner industry. If there is interest on your part for further information please feel free to see my website at www.egsfuel.com
>
> Michael Gray E global solutions inc. 516.779.6461 www.egsfuel.com
This discussion has been closed.

Categories