Munchkin Boilers

Unknown

it is not connected up yet. I am going to figure this all out. Just easier when you have someone who knows walk you through it.

Unknown

Munchkin Information

I know many of you are installing and servicing these boilers. I am trying to get educated on them. Is anyone willing to answer some questions that I have about them? I am looking for someone who has installed quite a few and knows the ins and outs of their operation. We can converse by e- mail or I can post the questions here. If you are nearby in New England I would be willing to work with you when you install one just to get a feel for the process. I work for FREE!

Mark Hunt

Geeze Timmie


I'm noy sure I want you carrying a 75lb. boiler into a basement, much less the 500lb. monster out.

E-mail me some questions and I will answer what I can, and the rest I'll make up!


Mark H

To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"

Unknown

Don't under estimate this old man

I can still hold my own. I am going to put togther all my questions and I will send you a copy.

paul lessard_3

Hey tim

I have spent munch time with these boilers and would like to help. don't you have a munchie at your place?
keep me in the "loop"

paul lessard_3

Hey tim

I have spent munch time with these boilers and would like to help. don't you have a munchie at your place?
keep me in the "loop"
also which kinds of applications are you interested in?

Mark Hunt

As the old saying goes

"be careful of what you wish for........"

I will answer all I can.

Mark H



To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"

tombig

Munchie

My closest look at a munchkin was at ASHRAE Cicago where I saw a peerless Pinnacle. Same unit. Still can't buy a munchkin in Chi-town to the best of my knowledge. Peerless has the analog model. Pretty bare bones as far as built ins. What's their HX warranty?

Troy_3

Timmie

I have well over a hundred up and running. I will be any help I can.

Scott22

Whatever the question or answer, please post them to this board so the rest of us Munchkin newbees can benefit. And don't hesitate to show the whole picture, warts and all.
Scott

Unknown

Munchkin Help

I have gotten connected up with Jeff Cook and his people and we are on our way to getting some questions answered. I appreciate all the offers for assistance.

It is my attitude always to find out every detail of how something works. Once I have done that then and only then can I feel comfotable teaching others about a control or piece of equipment.

There is so much new equipment that it is a full time job to learn what is needed to conduct adequate training. I rely heavily on factory people for training. Once they have taught me it has been my experience that I can then go and teach others. In that context I hopefully become an asset to them.

I am going to be having a month of training sessions at my center on high efficiency boilers.

Thursday May 1 Weil -McLain Gold and new "ULTRA"

Thursday May 8 Laars "ENDURANCE" with my friend Mark Hughes

Thursday May 15 Burnham "REVOLUTION" with Glenn Stanton another friend to us all.

Thursday May 22 Heat Transfer Products "MUNCHKIN" with my friend Jeff Cook who most of you have come to know and love.

I hope to add some others in the future like Matt Connelly with the Monitor "MZ" and maybe some Viessman folks and some from Buderus and the Slant/FIn people the list goes on.

After that we will tackle some of the WARM AIR Furnaces.

Michael B

hey big

Bill Bailey of American Hydronics is the "new" rep for the Munchkin in Chicago. If you want more info just call me 773-988-7649 or e-mail me...

Michael Bleier
Able Distributors
www.abledistributors.com
"The Supplier That Works With You"