Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

WIRSBO Factory Training, worthwhile?!

Jackchips
Jackchips Member Posts: 344
read the post "Wirsbo, who loves ya-----hb.

Any training is better than none but Wirsbo's sounds exceptional and at a great cost.

Comments

  • adambuild
    adambuild Member Posts: 413


    Just got an offer to attend 2 1/2 day training at WIRSBO in Minnesota June 9-11 for $300.00 per person. Anyone have any feedback?! Thanks in advance!

    Adam
    ADAM Builders
  • Steve Bergerson
    Steve Bergerson Member Posts: 38
    Go..

    I've been there, and found it to be VERY worthwhile. For someone just getting into radiant, it is essential. For someone who has already been doing radiant, it is very beneficial.... and oh yea.....It isn't boring. They make class fun, and the extra-curricular events are a blast as well..... complete with designated drivers.

    I more than made up my investment in time & money the first month after the Wirsbo training.

    Highly Recommended!

    Steve
  • John Felciano
    John Felciano Member Posts: 411
    Dont

    pass up the chance.Wirsbo is a first class company with top notch people!

    I attended back in 98

    To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"
  • Mark Hunt
    Mark Hunt Member Posts: 4,909
    By all means


    go to the training!

    Good folks at Wirsbo!

    Mark H

    To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"
  • Jamie_6
    Jamie_6 Member Posts: 710
    Worth Every penny!

    And then some! The amount of info. you are given in those three short days will easily pay for itself & then some!


    Great people, great product!
  • Tom Meyer
    Tom Meyer Member Posts: 300
    If you don't go, you'll regret it.

    Then again, after meeting Wes and John, you may regret it.

    Seriously, it's one of the best and alot of fun. Bring a BIG notebook and lots of pens. You'll be taking notes...no matter how long you've been in the field.

    Senior Designer/Trainer
    Precision Hydronics
    www.precisionhydronics.com
  • hot_rod
    hot_rod Member Posts: 21,874
    Wes & John

    along with Ingrid (who is more beautiful with each passing day) make this the best of the best. Lively, entertaining and downright educational - they'll leave you with a "WOW" feeling. After the night's festivities, Wes is likely to leave you with an "OW" feeling(G)!

    I had a wonderful time when there. Education is the key and although it's the Wirsbo products they feature (well, D'oh), the knowledge can be applied across the board.

    Trust me, you won't ever regret spending that 300. Another thing you can trust me on? You see Wes coming down the track, you'd best have good insurance(G)! That's a real smackdown. What black flag? I wasn't driving recklessly, it was all Wes - honest.

    To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • Joh n Brickey
    Joh n Brickey Member Posts: 43


    When I went to the training course we watched alot of the Red Green show and learned to apply duct tape the right way, we also learned how to do the "Funky Almadia" in the karaoke bar. But, I learned more about radiant heat than I thought I could in 3 days.
  • Ted_5
    Ted_5 Member Posts: 272
    It's like a good movie

    They keep you entertained and awake.I went and got alot of
    good info that can be applied to any product.I stopped listening when they started to say that you can do a staple
    up job with out plates,and run the water up to 180 to do it.
    After that I thought they are just doing this dog and pony
    show to sell tube anyway they can and not tring to sell good
    radiant systems.I still say go, but don't brain washed into
    thinking they are the only brand around.
    Just my review.
  • Tom Simensen
    Tom Simensen Member Posts: 74
    Wirsbo Training

    It was a very educational experience in 1996, and I understand that it is even better now. I wouldn't pass up the chance!
  • Arthur Binder
    Arthur Binder Member Posts: 18
    Wirsbo training

    Take the class. You will learn more than you thought you could in 3 short days. They will also give you tips on how to sell the concept.
  • shawn_3
    shawn_3 Member Posts: 20
    wirsbo best 300 bucks i ever spent

    i just went to the seminar in feb. it was very good john barba is very good at explainig everthing they will keep u on your feet bring an extra notebook you will need it trust me you dont know everything even though you think you do.activities after are very good p.s dont be to hungover in the mornings for class trust me take it from expierence
  • Bill Barrett
    Bill Barrett Member Posts: 43
    YES GO!

This discussion has been closed.