Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Trinity Boilers

Doug_5
Doug_5 Member Posts: 19
in THE MAIN WALL
See Trinity 150 thread and vice versa.

Comments

  • Dave Jahnke
    Dave Jahnke Member Posts: 16
    Trinity Boilers

    I was wondering if anyone has comments about the Trinity boiler. 92% AFUE condensing unit that is made by NTI
    (NY Thermal Inc). Their website is www.nythermal.com.
    Good? Bad? Stay Away From?
  • Terry
    Terry Member Posts: 186


    I just bought a couple. First one going in in march.

    I would like to see better/more info on spec sheets & manual. A rep that knows a boiler from a beer can would be nice too. (but thats a local problem)

    GL!~

    TERRY


  • Dan Peel
    Dan Peel Member Posts: 431
    I use them

    Pipe them for good flow and they seem to behave themselves. Well priced and the onboard reset controls are a bonus. Dan

    To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"
  • tim from Reed Wright
    tim from Reed Wright Member Posts: 113
    nti boilers

    Make sure you have a asme cert. on the boiler, just removed one that was not certified and in our area it must be.
  • Doug_5
    Doug_5 Member Posts: 19


    Our heat only T-150 was installed last fall. It has been great. Partnered with a Crown MegaStor 40 indirect. NTI's wall-hung is definitely worth a look.
  • Sizzle
    Sizzle Member Posts: 13
    Trinity T-150


    I install a Trinity T-150 to heat my shop on dec 16 2002
    and no problem at all up to now
    Combo system with cast iron free standings rads on one side
    danfoss trv on each rad and scorch air on the other side
    with hot water exchanger
    The duct work purpose air conditioning summer time.
    Another Trinity T 200 install in a rooming house oct 2002
    hot water with indirect and heating 18 rooms only one service call looking good up to now but still watching.
  • Sizzle
    Sizzle Member Posts: 13
    Trinity T-150


    I install a Trinity T-150 to heat my shop on dec 16 2002
    and no problem at all up to now
    Combo system with cast iron free standings rads on one side
    danfoss trv on each rad and scorch air on the other side
    with hot water exchanger
    The duct work purpose air conditioning summer time.
    Another Trinity T 200 install in a rooming house oct 2002
    hot water with indirect and heating 18 rooms only one service call looking good up to now but still watching.

    Serge
  • Steve Miller
    Steve Miller Member Posts: 115
    Trinity

    I installed my first one and things went great. It was a T200 and it replaced a 45 yr. old cast iron boiler with a tankless coil. Everything seems accessible and no problems on start up. I think it'll be a good boiler.

    Steve M.
  • Steve Miller
    Steve Miller Member Posts: 115


  • Steve Miller
    Steve Miller Member Posts: 115
    oops

    > I installed my first one and things went great.

    > It was a T200 and it replaced a 45 yr. old cast

    > iron boiler with a tankless coil. Everything

    > seems accessible and no problems on start up. I

    > think it'll be a good boiler.

    >

    > Steve M.



  • Steve Miller
    Steve Miller Member Posts: 115
    oops

    That was my first attachment with my new digital camera. Hope this shot is better.
  • Steve Miller
    Steve Miller Member Posts: 115
    oops

    Sorry about the size of the pic, it's my first attempt to attach a pic with my new digital camera. Hope this is better.
  • Steve Miller
    Steve Miller Member Posts: 115
    oops

    Sorry about the size, my first attempt to post a pic with my new digital camera. Hope this is better.
This discussion has been closed.

Categories