Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Sheet metal equipment
Jamie_6
Member Posts: 710
How strong is your hammer swinging arm?
We have one made by milwakee
We have one made by milwakee
0
Comments
-
Sheet metal equipment
I have a job coming up that is going to require a lot of custom duct work. Has anyone ever seen a tool that will fold over a pittsburgh lock instead of hammering it over. i have heard of them but never seen them. any help as to who makes them and where i can get one would be great.0 -
Doran Precision Inc. makes an air powerd closer and Eagle Morlin makes an air one and an electric one.0 -
Pittsburg lock hammer
Check out Eagle Morlin web they have two styles of seam closers.
www.eaglemorlin.com0 -
Has anyone ever used one of these? are they worth there weight or are they just junk. any comments welcome0 -
pittsburg
I have a morlin it works fine.
Ray M
To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"0 -
does milwakee still make one or have they quit?0
This discussion has been closed.
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 915 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements