Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
OK, Boiler Manufacturers, Part II
Tony Conner
Member Posts: 549
As far as I can tell, the response to my previous question regarding boiler eff, vs combustion eff has had ZERO responses from manufacturers. I did have an informative private exchange with ONE guy from ONE company. I will not name him, his outfit, or what was discussed.
The silence on this question is deafening, and says FAR more than I ever could.
Everybody who's involved with designing/purchasing/installing, not just this type of equipment, but ANYTHING should educate and think for themselves. The info being fed to you by glossy brouchures is much more often than not "edited for content". Anyone who cares should not only ask questions about the information in the literature, but what is NOT in it.
The silence on this question is deafening, and says FAR more than I ever could.
Everybody who's involved with designing/purchasing/installing, not just this type of equipment, but ANYTHING should educate and think for themselves. The info being fed to you by glossy brouchures is much more often than not "edited for content". Anyone who cares should not only ask questions about the information in the literature, but what is NOT in it.
0
This discussion has been closed.
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 915 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements