Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Any seminars in NYC area?
JohnNY1
Member Posts: 62
Basic hydronics or something like that by Burnham would be great. Please let me know if anything is coming around.
Thank you.
Thank you.
0
Comments
-
New York Training
John,
I will be in Long Island in May and June conducting Steam, Hot Water Boiler Replacement, and Advanced piping seminars. Not to mention an entire two weeks of training in New Jersey on various topics. Keep checking the Burnham web site for these events and signup sheets as these events unfold a little more. Right now, they are still in the planning stages in most cases. You can go directly to the Training portion of the web site by using the link below. Thanks for the interest.
www.burnham.com/seminars
Glenn Stanton
Manager of Training - Northeast Region
Burnham Hydronics0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements